H12-321_V1.0 Practice Online

Question 1

Regarding the Agile Controller admission model, what is the correct description below?

A : In the admission model, the core is the authorization condition and authorization result

B : Currently only 802.1x and Portal authentication can support all the conditions in the admission model.

C : Authorization element does not include IP address range

D : Authorization element does not include IP address range

Answer: A,B,D

Question 2

Which of the following commands is used to create a static load balancing group?

A : [AC-wlan-view] regulatory-domain-profile name domain1

B : [AC-w Ian-view] air-scan-profile name wlan-airscan

C : [AC-wlan-view] rrm-profile name profile-name

D : [AC-wlan-view] sta-load-balance static-group name static-1

Answer: D

Question 3

In the load balancing mode, what is the correct way for the RADIUS/Portal server to handle hot standby?

A : Fill in the backup NAS-IP-Address and billing session-id in the accounting and authentication packets.

B : The src ip in the Radius packet sent by the AC needs to be the same. The device address of the COA/DM configured on the Radius server can be different.

C : The original master node DOWN/uplink interrupt, the COA/DM packet received by the node needs to be processed and synchronized to the peer end. The master device needs to send the authorization information to the AP.

D : If the original primary node is not the DOWN/uplink interrupt, the backup node is also configured with a loopback interface with the same IP address as the primary node. The interface is not directly added to the IGP but is imported through import direct.

Answer: A

Question 4

On the N+1 backup network, a total of 300 APs from AP1 to AP300 are deployed on AC1, and 400 APs from AP301 to AP700 are deployed on AC2. The AC can be configured as a standby AP. When the AP goes online, without changing the configuration, the following statement is wrong?

A : If the AC1 is faulty, the APs in the AP1 to AP300 will perform the active/standby switchover in the AC3.

B : If the AC2 is faulty, the APs of the AP301 to the AP700 will perform the active/standby switchover in the AC3.

C : If AC1 and AC2 are faulty at the same time, only the 500 APs from AP1 to AP500 can perform active/standby switchover in AC3, and the remaining 200 APs cannot go online in AC3. The services of these APs will be interrupted.

D : After the AC1 or AC2 fails to recover, the APs that go online in AC1 and AC2 are undefined.

Answer: C,D

Question 5

In a management frame, which of the following ESS and IBSS bit values in the Capability Info field can identify a wireless bridge?

A : 0

B : 1

C : 10

D : 11

Answer: A

Name:	HCIP-WLAN-CEWA V1.0
Exam Code:	H12-321_V1.0
Certification:	Huawei Certified ICT Professional
Vendor:	Huawei
Total Questions:	536
Last Updated:	Apr 25, 2024

Download Demo H12-321_V1.0 Dumps

Create Account

Password Recovery

H12-321_V1.0 Practice Online

Download Demo H12-321_V1.0 Dumps

Member Login

Create Account

Password Recovery

H12-321_V1.0 Practice Online